|
Retrofit
barrel dramatically enhances extruder performance and
versatility
Are you looking
for greater finished product quality from your existing
extrusion system? The simple solution could be an economical
Barrel Conversion from Extru-Tech. The conversion will
dramatically increase your finished product quality while
expanding the number of products that can be produced on your
existing system. A few of the benefits you can expect include:
-
The
tapered cone head design allows the extruder to generate
higher die pressures. This is critical when extruding
small particle products such as fish foods and intricate
shapes such as cat foods.
-
The
screws are segmented allowing individual components to be
replaced rather the replacing the entire extruder screw.
The screws are made of a hardened stainless steel alloy
for maximum extended wear life.
-
The
segmented screw design also adds flexibility. By changing
to different screw and shearlock designs, the shear rate
of the barrel can be easily changed between runs. This
dramatically expands the number of products that can be
produced from the extruder.
-
The
E925 barrel conversion is larger in diameter and allows
the production capacity of the machine to be increased.
For more
information on the Sprout Conversion send an email to sales@extru-techinc.com
|
